The JCC JC121438 LED Strip Light is a professional 20-metre reel of high-output, 24V LED tape for larger residential, retail and commercial lighting projects. Its fixed 4000K colour temperature produces clean neutral-white illumination, while the dense arrangement of 120 LEDs per metre helps create a consistent linear lighting effect.

Producing approximately 1440 lumens per metre, this strip is suitable for long display runs, extensive fitted furniture, office interiors, reception counters, retail shelving and architectural lighting features.

High-output neutral-white lighting

The JC121438 uses 14.4W per metre and delivers approximately 1440 lumens per metre, achieving an efficiency of around 100 lumens per circuit watt.

The fixed 4000K neutral-white light offers a practical balance between warm white and cooler daylight tones. It is particularly suited to:

• Retail shelving and merchandise displays

• Long reception desks and service counters

• Kitchen cabinets and work surfaces

• Office joinery and storage systems

• Hotel corridors and furniture details

• Ceiling coves and architectural features

• Exhibition stands and display installations

• Commercial cabinets and illuminated signage structures

The strip has a broad 120-degree light distribution, helping spread illumination across the adjacent surface rather than creating a narrow beam.

Dense 120 LED-per-metre construction

With 120 LEDs per metre, the tape offers close LED spacing for a smoother line of light. Across the complete uncut 20-metre reel, this represents 2,400 individual LEDs.

For the most continuous visual effect, the tape can be installed within an appropriately sized aluminium profile with a compatible diffuser. The selected profile depth and diffuser opacity will influence whether individual LED points remain visible.

JCC profile options include surface-mounted, slimline surface, recessed, corner, plaster-in and slimline plaster-in designs.

50mm cutting intervals

Marked cutting points are positioned every 50mm, giving installers precise control over the finished length. This is particularly helpful when producing multiple custom sections for shelves, cabinets and furniture.

The tape must only be cut at the indicated marks. Every separated section requires a suitable 24V electrical connection with correct polarity, current capacity and insulation.

Once the reel has been cut, customers should retain a record of the installed lengths because the connected wattage must be calculated from the actual number of metres used.