Skip to content
Over 7000 Products at Incredible Prices!
Over 7000 Products at Incredible Prices!
Timeguard TX2410C 10A 30mA Solid Neutral RCBO C Curve 6kA, 30mA Type A, Uni-Directional

Timeguard TX2410C 10A 30mA Solid Neutral RCBO C Curve 6kA, 30mA Type A, Uni-Directional

SKU TX2410C
Β£11.16 - Β£11.16
Β£11.16 inc VAT Β£9.30 exc VAT
Β£11.16 - Β£11.16
Β£11.16 inc VAT Β£9.30 exc VAT inc VAT Β£9.30 exc VAT

Estimated delivery time: Estimated delivery tomorrow*

Description

The Timeguard TX2410C 10A 30mA Type A RCBO combines overload, short-circuit and residual-current protection in one compact device. Designed for Timeguard TX series consumer units, it has a C-curve overcurrent characteristic, a 6kA breaking capacity and a single-module housing.

It is an option for electricians selecting protective devices for a compatible installation or replacing an existing RCBO where the circuit requires these exact characteristics.

Understand Type A and C-curve

The two classifications describe different functions. Type A residual-current protection responds to sinusoidal AC and pulsating DC residual currents. C-curve describes the overcurrent operating characteristic.

Compared with an equivalent B-curve device, C-curve has a higher instantaneous magnetic operating threshold. This can accommodate brief starting currents where the equipment and circuit design support its use. The rated circuit current remains 10A.

Solid neutral and unidirectional operation

This model has a solid neutral, which remains connected when the protected line pole opens. It should be distinguished from a switched-neutral RCBO when checking the installation’s isolation requirements.

The device is also unidirectional. Supply and load connections must follow the manufacturer’s markings, and it must not be selected for a circuit requiring bidirectional power flow.

Practical terminals and maintenance features

Top terminals accept conductors up to 10mmΒ², with a specified tightening torque of 1.2Nm. Bottom terminals accept up to 25mmΒ², with a tightening torque of 2.5Nm.

Terminal blanking plates help prevent incorrect cable or busbar insertion. A test button and contact position indicator are included, and the RCBO can be removed without removing the busbar once the assembly has been safely isolated.

Measuring 18mm wide Γ— 85mm high Γ— 73mm deep, it mounts onto a 35mm DIN rail. Timeguard provides a five-year guarantee, subject to its applicable terms.

Manufacturer compatibility is limited to Timeguard TX series consumer units.

Specification
  • Single Pole and Solid Neutral, Type A, C Curve Residual Current Breaker with Overload protection
  • Uni Directional
  • 30mA tripping current and provides protection against earth fault, leakage current, short circuit and overloading
  • 1 module width
  • 35mm DIN rail mounting
  • Terminals have an automatic blanking plate, preventing incorrect termination
  • Can be removed without removing the busbar
  • 5-year guarantee