Skip to content
Over 7000 Products at Incredible Prices!
Over 7000 Products at Incredible Prices!
Timeguard TX1928EV 8 Module IP2X EV Consumer Unit with 100A Mains Switch, Type 2 SPD, and 40A 30mA C Curve Type A RCBO

Timeguard TX1928EV 8 Module IP2X EV Consumer Unit with 100A Mains Switch, Type 2 SPD, and 40A 30mA C Curve Type A RCBO

SKU TX1928EV
Β£70.57 - Β£70.57
Β£70.57 inc VAT Β£58.81 exc VAT
Β£70.57 - Β£70.57
Β£70.57 inc VAT Β£58.81 exc VAT inc VAT Β£58.81 exc VAT
Datasheet

Estimated delivery time: Estimated delivery tomorrow*

Description

The Timeguard TX1928EV is a white, surface-mounted steel EV consumer unit supplied with a 100A double-pole main switch, Type 2 SPD and 40A 30mA Type A C-curve RCBO.

Its eight-module enclosure also includes four blank modules, covering the unused positions. The main switching, surge protection and outgoing circuit protection are already fitted for an electrician to assess and incorporate into the charging installation.

Understand the Fitted Protection

The double-pole main switch switches line and neutral together. The Type 2 surge protection device helps protect connected equipment against transient overvoltagesβ€”brief voltage surges that can damage electrical and electronic components.

The 40A RCBO combines residual-current protection with overload and short-circuit protection. Its 30mA rating identifies the residual-current sensitivity, while C curve describes its overcurrent-tripping characteristic.

The main switch’s 100A rating should not be confused with the outgoing circuit rating. The fitted RCBO is rated at 40A, and charger compatibility must be checked against the complete installation design.

Steel Enclosure with Practical Cable Access

The IP2X steel enclosure is intended for indoor installation. A raised, removable DIN rail allows cables to pass underneath, and the floating busbar has a pre-fitted protective cover.

Top, bottom, side and rear knockouts provide options for different cable approaches. A rear-entry grommet and circuit identification labels are supplied.

The back box measures 259mm high Γ— 232mm wide Γ— 87mm deep. The curved visor can accept a separately purchased locking kit.

Specification
  • Product code - TX1928EV
  • Product type - Populated EV consumer unit
  • Colour - White
  • Enclosure material - Steel
  • Mounting - Surface mounted
  • Enclosure capacity - 8 modules
  • IP rating - IP2X
  • Installation environment - Indoors
  • Main switch - 100A double pole
  • Surge protection - Pre-fitted single-module Type 2 SPD
  • Outgoing protective device - 40A RCBO
  • RCBO residual-current sensitivity - 30mA
  • RCBO residual-current type - Type A
  • RCBO trip curve - C curve
  • Fitted outgoing protective devices - 1
  • Included blank modules - 4
  • Maximum assembly current - 100A, according to DS1670
  • Published supply voltage - 240V AC
  • Device compatibility - Timeguard TX-series consumer unit devices only
  • Neutral bars - 1
  • DIN rail - Raised and removable
  • Busbar - Floating design with pre-fitted protective cover
  • Back-box dimensions - 259mm H Γ— 232mm W Γ— 87mm D
  • Top knockouts - 4 Γ— Ø20mm and 1 Γ— Ø32mm
  • Bottom knockouts - 4 Γ— Ø20mm and 1 Γ— Ø32mm
  • Rear knockout - 1 Γ— 90mm Γ— 50mm
  • Side knockouts - 1 Γ— Ø32mm on each side
  • Included installation accessories - Rear grommet, blank modules and circuit identification labels
  • Visor locking kit - Available separately
  • Enclosure standard - BS EN 61439-3
  • Enclosure guarantee - 10 years
FAQ's

What is included with the Timeguard TX1928EV?

It includes a steel enclosure, 100A double-pole main switch, Type 2 SPD, 40A 30mA Type A C-curve RCBO, four blanks, rear grommet and circuit labels.

Is this an EV charger?

No. It is a populated consumer unit for an electrician to specify as part of the charger’s electrical supply arrangement.

Does eight modules mean eight charging circuits?

No. Eight modules describes the enclosure capacity. The supplied configuration has one outgoing RCBO and four blank modules.

Do the four blanks mean four additional EV chargers can be connected?

No. Additional circuits require assessment of demand, supply capacity, protective devices, cable design and the complete assembly.

Does the 100A main switch mean the charger can draw 100A?

No. The fitted outgoing RCBO is rated at 40A. Charger demand and circuit design must be assessed against the complete protection arrangement.

What does the RCBO’s 30mA rating mean?

It identifies its rated residual-current sensitivity. It is separate from the 40A load-current rating.

What is the difference between C curve and Type A?

C curve describes the overcurrent-tripping characteristic. Type A describes the residual-current detection characteristics.

Does the RCBO protect against overloads and short circuits?

Yes. It combines overcurrent protection with residual-current protection for the outgoing circuit.