Skip to content
Over 7000 Products at Incredible Prices!
Over 7000 Products at Incredible Prices!
Timeguard TX1314 14 Modules 12 Free Ways 100A Mains Switch Consumer Unit (No SPD)

Timeguard TX1314 14 Modules 12 Free Ways 100A Mains Switch Consumer Unit (No SPD)

SKU TX1314
Β£44.89 - Β£44.89
Β£44.89 inc VAT Β£37.41 exc VAT
Β£44.89 - Β£44.89
Β£44.89 inc VAT Β£37.41 exc VAT inc VAT Β£37.41 exc VAT

Estimated delivery time: Estimated delivery tomorrow*

Description

The Timeguard TX1314 is a surface-mounted steel consumer unit supplied with a 100A double-pole main switch and 12 free outgoing ways. It has a 14-module enclosure and does not include a surge protection device.

Designed for domestic new builds, renovations and consumer unit replacements, this model allows an electrician to specify the outgoing protection for the installation. RCBOs and AFDD/RCBOs are selected separately using compatible Timeguard TX-series devices.

Check the No-SPD Configuration Before Ordering

This is the main-switch-only version. It should not be confused with the TX1114, which includes a Type 2 SPD and provides 11 free outgoing ways.

The double-pole main switch switches line and neutral together. It provides the main switching point for the outgoing circuits, while the separately selected protective devices provide the protection required for each circuit.

The absence of a fitted SPD is an important buying detail. Your electrician should assess the installation’s surge-protection arrangements before choosing this model. The manufacturer’s instructions also allow a compatible SPD to be added, subject to the appropriate device selection and available module space.

Practical Space for Cable Routing

A raised, removable DIN rail allows cables to pass underneath, helping with routing inside the enclosure. The floating busbar has a pre-fitted protective cover, and cable-entry knockouts provide options for cables approaching from above, below, behind or either side.

The unit is supplied with a live busbar, blank modules, rear-entry grommets and circuit identification labels.

Specification
  • Product code - TX1314
  • Product type - Main-switch consumer unit without SPD
  • Enclosure material - Steel
  • Mounting - Surface mounted
  • Enclosure capacity - 14 modules
  • Free outgoing ways - 12
  • Main switch - Pre-fitted 100A double pole
  • Surge protection device - Not included
  • Outgoing protective devices - Selected separately
  • Compatible devices - Timeguard TX-series consumer unit devices only
  • Maximum assembly current - 100A
  • Supply - 220–240V AC, 50Hz, according to the installation instructions
  • IP rating - IP2X, according to the metal-enclosure instructions
  • Installation environment - Indoors
  • DIN rail - Raised and removable
  • Busbar - Floating design with pre-fitted protective cover
  • Back-box dimensions - 259mm H Γ— 304mm W Γ— 87mm D
  • Top knockouts - 7 Γ— Ø20mm and 1 Γ— Ø32mm
  • Bottom knockouts - 6 Γ— Ø20mm and 2 Γ— Ø32mm
  • Rear knockouts - 2 Γ— 90mm Γ— 50mm
  • Side knockouts - Ø32mm
  • Included accessories - Live busbar, blank modules, rear grommets and circuit identification labels
  • Visor locking kit - Available separately
  • Enclosure standard - BS EN 61439-3
  • Published guarantee - 10 years
FAQ's

What is the Timeguard TX1314?

It is a 14-module steel consumer unit supplied with a 100A double-pole main switch, 12 free outgoing ways and no SPD.

Does it include surge protection?

No. An SPD is not supplied with this model. Check the installation’s surge-protection requirements with the electrician before ordering.

How does TX1314 differ from TX1114?

TX1314 has 12 free ways and no SPD. TX1114 includes a Type 2 SPD and has 11 free ways.

Are RCBOs included?

No. Outgoing protective devices are selected separately to suit the circuits and installation design.

Which protective devices are compatible?

The manufacturer specifies Timeguard TX-series consumer unit devices only. Physical fit on a DIN rail does not establish compatibility with another brand.

Can AFDD/RCBO combination devices be fitted?

Yes. The manufacturer’s main-switch installation instructions provide for RCBO/AFDD devices. Check the selected devices’ compatibility and module widths.

Can an SPD be added later?

The instructions state that an SPD can be fitted. A qualified installer must select a compatible device and check the resulting layout and available space.