Skip to content
Over 7000 Products at Incredible Prices!
Over 7000 Products at Incredible Prices!
Timeguard TX1114 White 11-Way Consumer Unit with 100A Main Switch & Type 2 SPD

Timeguard TX1114 White 11-Way Consumer Unit with 100A Main Switch & Type 2 SPD

SKU TX1114
£58.33 - £58.33
£58.33 inc VAT £48.61 exc VAT
£58.33 - £58.33
£58.33 inc VAT £48.61 exc VAT inc VAT £48.61 exc VAT

Estimated delivery time: Estimated delivery tomorrow*

Description

The Timeguard TX1114 is a white steel consumer unit with a factory-fitted 100A double-pole main switch and Type 2 surge protection device. Its 14-module enclosure provides 11 free outgoing ways, giving your electrician space to select the circuit protection needed for the installation.

Designed for domestic new builds, renovations and consumer unit replacements, this surface-mounted board allows the outgoing layout to be specified for the property. RCBOs and AFDD/RCBOs are selected separately, so this model should not be confused with a fully populated consumer unit.

Understand what is included

The double-pole main switch provides a common switching point for the outgoing circuits. The Type 2 SPD helps protect connected equipment against transient overvoltages—brief voltage surges that can damage electronics.

These components perform different jobs from the outgoing protective devices. Your electrician must select suitable protection for each circuit using compatible Timeguard TX-series devices

Specification
  • Product code - TX1114
  • Product type - Main-switch consumer unit
  • Colour - White
  • Enclosure material - Steel
  • Mounting - Surface mounted
  • Enclosure size - 14 modules
  • Free outgoing ways - 11
  • Main switch - Pre-fitted 100A double pole
  • Surge protection - Pre-fitted single-module Type 2 SPD
  • Maximum assembly current rating - 100A
  • Supply voltage - 220–240V AC, 50Hz in the installation instructions
  • Compatible outgoing devices - Timeguard TX-series devices only
  • Outgoing RCBOs / AFDD-RCBOs - Selected separately
  • Neutral bars - 1
  • DIN rail - Raised and removable
  • Busbar - Floating design with protective cover
  • Back-box dimensions - 259mm H × 304mm W × 87mm D
  • Top knockouts - 7 × Ø20mm and 1 × Ø32mm
  • Bottom knockouts - 6 × Ø20mm and 2 × Ø32mm
  • Rear knockouts - 2 × 90mm × 50mm
  • Side cable entries - Ø32mm knockouts
  • Supplied accessories - Live busbar, blank modules, rear grommets and circuit identification labels
  • Lid locking kit - Available separately
  • Enclosure standard - BS EN 61439-3
  • Enclosure guarantee - 10 years
FAQ's

Is the TX1114 a 14-way or an 11-way consumer unit?

It has a 14-module enclosure with 11 free outgoing ways. The fitted main switch and SPD occupy the remaining module space.

Does it come with RCBOs?

No. It includes the main switch and Type 2 SPD; compatible outgoing protective devices are selected separately.

Which circuit protection devices can I fit?

The manufacturer specifies Timeguard TX-series devices only. Do not assume another brand is compatible because it fits the DIN rail.

Can it accommodate AFDD/RCBO combination devices?

Yes. Timeguard describes its main-switch enclosures as suitable for RCBOs and AFDD/RCBOs. Check the selected devices and available space when specifying the layout.

Does the 100A main switch provide overload protection?

It is the main switching device, rather than an outgoing circuit breaker. Suitable overcurrent protection must be provided as part of the installation design.

What does double pole mean?

The main switch switches both the line and neutral conductors together.

Does the Type 2 SPD replace an RCD or RCBO?

No. Surge protection addresses transient overvoltages. Residual-current and overcurrent protection require the appropriate separate protective devices.

Does 11 free ways guarantee space for any 11 protective devices?

No. The finished layout depends on the module widths and compatibility of the selected devices.