Which floodlight should I choose for a house-building project?
Consider the Red Arrow ADVF100Y if you need a 100W supply-powered floodlight and your project has a suitable electrical supply and mounting position. Before choosing, identify your work areas, the tasks being carried out and any obstacles that could create shadows.
Should I choose a 50W or 100W site floodlight?
Compare lumen output as well as wattage. The Astra ADVF100Y produces twice the stated lumens of the 50W ADVF50Y, while using twice the rated power. Choose the higher-output model when your lighting plan needs more light from each fitting. It does not automatically illuminate twice the area to the same standard.
Will one 100W floodlight light my entire building site?
Not necessarily. Coverage depends on mounting height, distance, obstacles and how much light each task requires. One fitting may leave shadows behind walls or materials. Plan separate light positions for work areas and access routes where needed.
Can I use the same floodlight on a 110V site supply and a 240V supply?
This model supports both within its specified operating range. However, the correct connection equipment is still needed for the supply being used. Confirm the installation arrangement with the person responsible for your site electrics.
Is it suitable for outdoor building work?
Its IP65 rating makes it an option for appropriately installed outdoor lighting. Follow the manufacturer’s instructions and protect all electrical connections appropriately; separate plugs and cable joints do not inherit the fitting’s protection rating.
Is this a plug-in site light with a stand?
Do not assume it is a complete plug-in kit. Red Arrow lists a mounting bracket, but the product-page information does not confirm a supplied plug, stand or transformer. Contact Electricals Online if you need these accessories before ordering.
How much electricity does a 100W LED floodlight use?
At its rated power, it uses approximately 0.1kWh per hour, or 0.8kWh over eight hours. Multiply this by your electricity unit rate to estimate the running cost. At an example rate of 25p per kWh, eight hours would cost approximately 20p.
Where should I position floodlights during a renovation?
Aim to illuminate the work without shining directly into people’s eyes. Consider where people will stand, because a light positioned behind a worker can cast a shadow onto the task. Reassess positions as walls, scaffolding and stored materials change throughout the project.
