80W outdoor LED floodlight with a directional asymmetric beam

The JCC Toughflood JC050001 is a grey 80W LED floodlight delivering 9,200 lumens of 4000K cool white light. Its asymmetric optics make it worth considering for exterior lighting projects where the direction of the light matters as much as its brightness.

Unlike a floodlight with an evenly centred beam, this model uses an asymmetric distribution to direct its output towards the area being lit. JCC specifies an 80° × 150° beam with a 60° downward direction. For electricians planning lighting around commercial premises, external access areas or yards, this provides a useful starting point when selecting the fitting’s position and aiming angle. Actual coverage depends on the mounting height and site layout.

IP65 protection and IK08 impact resistance

An IP65 rating provides protection against dust and water jets, while the IK08 rating identifies its resistance to mechanical impact. These are separate ratings: one concerns ingress protection, and the other concerns impact resistance.

The grey fitting mounts using its supplied bracket. The installation drawing shows a 260mm housing width, a 296mm overall width across the bracket, a 277mm height and an 88mm depth.

Electrical connection and installation

This non-dimmable LED floodlight operates from a 220–240V AC, 50/60Hz supply. It is a Class I fitting and requires an earth connection.

A 0.4m flex is provided for connection. The terminal block is not included, so the installer will need to provide a suitable IP-rated connection and appropriate mounting fixings.

The exact 80W model achieves 115 lumens per circuit watt. Choose it by its light output and beam distribution, rather than assuming that every floodlight with the same wattage will illuminate an area in the same way.