JCC JC72305MW Skytile Surface Linear Microwave Sensor LED Light, 4000K, White
Estimated delivery time: Estimated delivery tomorrow*
Description
The JCC JC72305MW Skytile Surface Linear brings bright, neutral white light and microwave on/off sensing to dry indoor commercial spaces. It is a useful choice for corridors, circulation routes, offices and retail areas where lighting needs to respond to movement. The sensor can switch the fitting on when it detects activity, while its settings allow an installer to tailor detection and how long the light remains on.
The fitting delivers a manufacturer-listed 4200 lumens in 4000K neutral white. Its broad 120° light distribution suits general illumination, while the long opal diffuser gives it the appearance of a clean, continuous rectangular light. The white housing sits neatly against a pale ceiling and has a shallow 54mm overall depth, which is useful where a deeper surface fitting would look too prominent. JCC also highlights its wipeable surface and secure anti-tamper design.
Adjustable microwave on/off sensing
The microwave function is more useful when it is set for the actual room. JCC’s Skytile Surface instructions show settings for detection area, hold time and an ambient-light threshold. For example, an installer can adjust how far the sensor responds to movement, how long the light stays on after activity stops, and whether it should respond when the surrounding space is already bright. Detection in a real room will depend on mounting position and surrounding materials, so the sensor should be checked after installation.
This is the microwave on/off version. It is not listed as a dimmable or step-dim model, and the product-specific datasheet does not identify an emergency battery. Choose the correct variant if your project calls for dimming, a maintained low-light level, or emergency operation during a power failure.
Plan for its actual size
Although JCC’s product-specific datasheet calls it a 1200mm Skytile Surface Linear, its stated overall dimensions are 1300 × 300 × 54mm. That distinction matters when planning a ceiling position or replacing an older light. The broad 300mm body gives it a different appearance from a narrow LED batten, so measure the available space and check fixing positions before ordering. JCC specifies surface fixing with screws and suitable plugs or conduit mounting; it also lists the JC71311 1.5m suspension kit as an available accessory.
