Skip to content
Over 7000 Products at Incredible Prices!
Over 7000 Products at Incredible Prices!

JCC JC121417 LED Strip 10m 24V 9.6W IP65 3000K

SKU JC121417
Original price £43.20 - Original price £43.20
Original price
£43.20 inc VAT £36.00 exc VAT
£43.20 - £43.20
Current price £43.20 inc VAT £36.00 exc VAT inc VAT £36.00 exc VAT

Estimated delivery time: Estimated delivery tomorrow*

Description

The JCC JC121417 10m LED strip provides a generous length of 3000K warm white tape for lighting cabinets, fitted furniture, shelving and architectural details. It is suited to electricians planning a coordinated scheme across several kitchen units or measured feature runs. Its IP65 rating also makes it an option for appropriately designed lighting where protection from moisture is required. 

At 960 lumens per metre, JC121417 can do more than add a faint decorative glow. Position it beneath cabinets for supplementary worktop light, inside display shelving to highlight products, or behind a suitable detail for a softer reflected effect. It uses 9.6W per metre, has 120 LEDs per metre and provides a 120° beam angle. The finished brightness and visibility of individual LEDs will depend on placement and any profile or diffuser used.

FAQ's

What light colour does JCC JC121417 produce?
JC121417 produces 3000K warm white light, suited to customers who want a warmer appearance for kitchen cabinetry, living spaces, fitted furniture and feature lighting.

How bright is the JCC JC121417 10m LED strip?
It is rated at 960 lumens per metre, with 120 LEDs per metre and a 120° beam angle. The amount of light reaching a surface depends on installation height, tape position and any diffuser used.

Is JC121417 suitable for kitchen worktop lighting?
It can provide supplementary light beneath kitchen cabinets. Assess the required worktop illumination, mounting position and other room lighting before deciding whether it will be sufficient on its own. Its rated output is 960lm/m.

What size driver is required for 10m of JCC JC121417?
The strip uses 9.6W/m, so 10m has a calculated 96W rated strip load. Use a compatible 24V DC driver with enough capacity for the length connected, and never exceed the driver’s maximum rated wattage.

Can I split JC121417 between two 5m sections?
The strip can be cut at marked 50mm points, so separate measured sections can be prepared. Each 5m section is rated at 48W; the electrician must plan suitable feeds, connections and driver capacity for both sections.

Is JCC JC121417 dimmable?
Yes, depending on the driver. Choose compatible dimming equipment for the control method planned; the strip should not be assumed to work with every existing dimmer.

7. Can JC121417 be installed outdoors?
JCC’s installation instructions describe its IP65 tape as suitable for outdoor use. The exact position, driver, cable connections and cut ends must be protected appropriately for the site conditions.