Marine floodlight with selectable wattage and colour temperature

The JCC Toughflood Pro Marine JC050023 is a grey asymmetric LED floodlight with selectable 200W, 300W and 400W settings. It also offers a choice of 3000K, 4000K or 5700K colour temperatures, allowing the installer to configure both power and light appearance for the project.

With a published maximum output of 60,340 lumens, this is a high-output fitting for substantial exterior lighting installations. Its 125° × 30° asymmetric beam provides a broad spread in one direction and a narrower spread in the other. Mounting positions, spacing and aiming should be assessed together to achieve the required illumination.

Salt spray tested for demanding environments

JCC reports that the Toughflood Pro Marine range has passed 1,000-hour salt spray and 60-hour chlorine corrosion testing. The manufacturer identifies ports, marinas, industrial plant and coastal infrastructure among its intended applications.

IP66 ingress protection and IK08 impact resistance provide separate measures of protection against dust, powerful water jets and mechanical impact. These ratings complement the corrosion testing when assessing the fitting for an exposed location.

Adjustable photocell included

The built-in photocell can switch the light according to surrounding daylight levels. Two threshold settings are available: 25 lux on / 75 lux off, or 200 lux on / 600 lux off. The photocell can also be disabled.

The factory settings are 4000K, full power and photocell disabled, so daylight-controlled operation needs to be selected during installation.

Installation and mounting options

The floodlight is pre-wired with 1.4m of flex and measures 442mm wide × 590mm high × 65mm deep. JCC lists compatible pole-mounting adaptors for 42mm, 60mm and 76mm poles.

This non-dimmable Class I fitting requires an earth connection and a 220–240V AC, 50/60Hz supply. Connection hardware and fixings must suit the installation.