Skip to content
Over 7000 Products at Incredible Prices!
Over 7000 Products at Incredible Prices!
JCC JC050007 Toughflood Commercial 150W 16300lm 109lpcW 4000K IP65 Black

JCC JC050007 Toughflood Commercial 150W 16300lm 109lpcW 4000K IP65 Black

SKU JC050007
£62.39 - £62.39
£62.39 inc VAT £51.99 exc VAT
£62.39 - £62.39
£62.39 inc VAT £51.99 exc VAT inc VAT £51.99 exc VAT
Datasheet

Estimated delivery time: Estimated delivery tomorrow*

Description

150W commercial LED floodlight with a wide 110° beam

The JCC Toughflood Commercial JC050007 is a black 150W outdoor LED floodlight delivering 16,300 lumens of 4000K neutral white light. Its wide 110° beam makes it an option for exterior lighting projects where a broad spread of light is required.

For electricians planning lighting around commercial premises, external access areas or yards, the beam distribution matters alongside brightness. This is the Toughflood Commercial model, with a different specification from JCC’s Toughflood Asymmetric range. Select it according to the required light levels, mounting position and site layout.

Die-cast aluminium body and polycarbonate diffuser

The fitting combines an ADC12 die-cast aluminium body with a polycarbonate diffuser. JCC describes the body as corrosion resistant and lightweight, helping with handling during installation.

IP65 ingress protection and an IK08 impact rating provide separate measures of protection against dust, water ingress and mechanical impact. The fitting uses driverless technology with instant start-up and is non-dimmable.

Pre-wired with a 2m exterior cable

A 2m H05RN-F cable is pre-wired to the floodlight, giving the installer cable length to work with when positioning the electrical connection. A suitable IP-rated connection is required; the terminal block is not included.

The galvanised steel mounting bracket has a 55° angled design for access during installation. Suitable mounting fixings need to be provided separately.

Check mounting height and dimensions

JCC’s instructions specify outdoor use only and a maximum mounting height of 5m. The published overall dimensions are 378mm wide × 313mm high × 38mm deep.

This Class I fitting requires an earth connection and a 220–240V AC, 50/60Hz supply.

Specification
  • Range - Toughflood Commercial
  • Product code - JC050007
  • Product type - Outdoor commercial LED floodlight
  • Colour - Black
  • Circuit wattage - 150W
  • Actual light output - 16,300 lumens
  • Colour temperature - 4000K neutral white
  • Beam angle - 110°
  • Efficacy - 109 lumens per circuit watt
  • Colour rendering index - Ra70
  • Dimmable - No
  • Technology - Driverless, with instant start-up
  • Supply voltage - 220–240V AC
  • Supply frequency - 50/60Hz
  • Electrical class - Class I
  • Earth connection required - Yes
  • IP rating - IP65
  • Impact rating - IK08
  • Body material - ADC12 die-cast aluminium
  • Diffuser material - Polycarbonate
  • Bracket material - Galvanised steel
  • Bracket design - 55° angled
  • Mounting - Wall mounted using bracket
  • Maximum mounting height - 5m
  • Supplied cable - 2m pre-wired H05RN-F
  • Overall dimensions - 378 × 313 × 38mm
  • Housing width shown in drawing - 360mm
  • Operating temperature - −20°C to +40°C
  • Mounting fixings - Not supplied
  • Connection terminal block - Not supplied
  • Light source - Non-replaceable
  • Application restriction - Outdoor use only
FAQ's

What is the JCC JC050007?

It is a black 150W Toughflood Commercial LED floodlight with a 110° beam, 4000K light and a published output of 16,300 lumens.

Is this the same as the 150W Toughflood Asymmetric?

No. These are different products. JC050007 is the black Toughflood Commercial with a 110° beam. Choose by the complete specification rather than assuming all 150W Toughflood fittings are interchangeable.

Is the correct output 12,500 or 16,300 lumens?

JCC’s browser title shows 12,500 lumens, while its visible product specification and linked installation sheet agree on 16,300 lumens. This listing uses the latter figure and identifies the discrepancy.

What does the 110° beam tell me?

It describes the spread of the light. It does not establish a guaranteed coverage area or the light level that will reach the ground.

What is the maximum mounting height?

JCC’s installation instructions specify a maximum mounting height of 5m. This is a mounting limit, rather than a guarantee of suitable illumination at that height.

How many fittings will I need?

That depends on the site dimensions, mounting positions and required illumination. A lighting calculation is needed to assess coverage and uniformity accurately.

Is the light warm white or daylight?

The specified colour temperature is 4000K, described as neutral white in JCC’s technical information. It should not be listed as a warm white or 6500K daylight model.

What does driverless technology mean for installation?

JCC identifies the product as driverless with instant start-up. Its installation requirements remain those of a 220–240V AC Class I luminaire, including an earth connection.

Can it be dimmed?

No. JCC specifies this exact model as non-dimmable.

What cable is supplied?

It comes pre-wired with 2m of H05RN-F cable. The installer must still provide a suitable protected connection.

Is a terminal block included?

No. JCC states that the terminal block is not supplied and requires a suitable IP-rated connector during installation.

Does the 55° bracket figure describe the beam angle?

No. The bracket design and optical beam are separate specifications. JCC describes the bracket as 55° angled and the light beam as 110°.