JCC BC020011 24V 50W Triac dimmable IP20 Driver

The JCC BC020011 50W 24V Triac Dimmable LED Driver is a professional constant-voltage power solution for compatible 24V single-colour LED strip lighting. Designed for electricians, electrical contractors, kitchen installers and lighting professionals, this compact JCC LED driver is ideal where a reliable 50W LED strip power supply is required together with smooth mains dimming control.

Taking a standard 220–240V mains input and supplying compatible 24V LED tape, the BC020011 is particularly suited to kitchen cabinet lighting, under-cabinet LED strips, shelving, wardrobes, display lighting, reception counters, retail lighting and architectural linear lighting.

50W Capacity for Medium and Longer LED Strip Runs

The 50W output makes the JCC BC020011 a useful step up from smaller LED drivers when a longer run of LED strip needs to be powered from one supply.

JCC specifies maximum compatible LED strip lengths of approximately:

10.4 metres of 4.8W/m LED strip
5.2 metres of 9.6W/m LED strip
3.5 metres of 14.4W/m LED strip

This makes the BC020011 especially useful for larger kitchen installations, longer cabinet runs and commercial linear-lighting projects where a smaller 25W driver may not provide enough capacity.

For customers searching for a 24V 50W LED driver for a 5 metre LED strip, this model is particularly well suited to compatible 9.6W/m tape, where JCC states a maximum run of around 5.2 metres.

Triac Dimming for Standard Wall Dimmer Control

A major advantage of the JCC BC020011 is its Triac dimming compatibility.

JCC states that the driver supports both leading-edge and trailing-edge dimming, with a wide 1% to 100% dimming range. This allows a suitable compatible wall dimmer to control the brightness of connected single-colour LED tape.

This makes the driver a strong solution for customers searching for:

trailing-edge LED driver, leading-edge LED driver, Triac dimmable 24V driver, mains dimmable LED strip power supply or dimmable LED tape transformer.

For residential installations, this means under-cabinet or feature lighting can be operated at full brightness when practical illumination is required and reduced later to create softer ambient lighting.

Ideal Driver for Kitchen Cabinet LED Strip

The JCC BC020011 is particularly useful for kitchen LED strip installations.

24V LED tape is frequently installed underneath cabinets, above units, inside shelving or around architectural kitchen details, and the correct driver is essential for providing a stable low-voltage supply.

With up to 50W available, the BC020011 can support longer runs than smaller drivers, reducing the need for multiple power supplies in appropriately designed installations.

This creates valuable SEO relevance for searches including:

kitchen LED strip driver, under cabinet LED driver, 24V kitchen lighting transformer, LED tape power supply for cabinets, and dimmable kitchen LED lighting driver.

Designed for Single-Colour LED Tape

The BC020011 is specifically designed for single-colour 24V LED strip.

This makes it suitable for compatible fixed-colour LED tape such as:

3000K warm white LED strip
4000K neutral white LED strip

It is therefore ideal for customers who need dimmable white LED lighting rather than RGB or RGBW colour-changing control.

220–240V Mains Input to 24V LED Supply

The driver accepts a 220–240V mains supply, making it suitable for typical UK electrical installations when installed correctly.

It then supplies the appropriate 24V output required by compatible LED strip.

For installers, this makes the BC020011 the essential interface between the mains lighting circuit and the low-voltage LED tape.

Compact 184 × 61 × 32mm Driver

The JCC BC020011 measures approximately 184mm long, 61mm wide and 32mm high.

Its relatively compact form makes it suitable for installation in appropriate accessible locations such as cabinet spaces, service voids and dedicated lighting-control areas.

Correct driver positioning remains important, especially because JCC specifies that the unit must not be covered and requires free airflow.

Class II LED Driver

The BC020011 is a Class II product, using double or reinforced insulation as part of its electrical safety design.

This makes it suitable for appropriately designed professional LED lighting installations.

IP20 for Indoor Lighting Installations

The IP20 rating means the BC020011 is intended for dry indoor locations.

Suitable applications include:

kitchens, bedrooms, living areas, wardrobes, cabinets, retail displays, reception areas, commercial interiors and indoor architectural lighting.

The driver should not be treated as suitable for exposed outdoor or wet-area installation unless it is placed within an appropriately designed enclosure or installation arrangement.

Operating Temperature from -20°C to +50°C

JCC specifies an operating temperature range of approximately -20°C to +50°C.

The driver should be installed where sufficient airflow is available and must not be covered by insulation, helping prevent excessive heat accumulation.

5-Year Warranty for Professional Installations

The JCC BC020011 is covered by a 5-year warranty, providing additional confidence for electricians and customers specifying the driver for professional residential or commercial LED strip installations.

For customers searching for a JCC BC020011, 50W 24V LED driver, Triac dimmable LED strip driver, dimmable LED transformer, 24V LED tape power supply, kitchen cabinet LED driver, trailing-edge LED driver or professional LED strip driver, the JCC BC020011 offers a dependable and versatile solution for compatible single-colour JCC LED tape.