JCC BC020010 24V 25W Triac dimmable IP20 Driver

JCC BC020010 24V 25W Triac Dimmable IP20 LED Strip Driver

The JCC BC020010 24V 25W Triac Dimmable LED Driver is a compact professional power supply designed for compatible single-colour 24V LED strip lighting. Ideal for electricians, electrical contractors, kitchen installers, shopfitters and lighting professionals, this driver converts a 220–240V mains input to a 24V low-voltage supply for suitable LED tape installations.

With a maximum output of 25W, the JCC BC020010 is particularly suited to smaller LED strip runs used for under-cabinet lighting, kitchen worktop lighting, shelving, wardrobes, display lighting, furniture illumination, ceiling features and architectural LED strip installations.

24V 25W LED Strip Driver

The BC020010 is a 24V 25W LED driver, making it suitable for compatible 24V single-colour JCC LED strip.

Selecting the correct LED driver is essential because the total wattage of the connected strip must remain within the driver's rated capacity.

JCC specifies the following maximum LED strip run lengths for BC020010:

4.8W/m LED strip – maximum run approximately 5.2m
9.6W/m LED strip – maximum run approximately 2.6m
14.4W/m LED strip – maximum run approximately 1.7m

This makes the BC020010 particularly useful for smaller kitchen cabinet runs, shelving sections and bespoke lighting installations where a higher-output driver is not required.

Triac Dimmable LED Driver

One of the key features of the JCC BC020010 is its Triac dimming compatibility.

The driver supports both leading-edge and trailing-edge dimming, giving electricians greater flexibility when pairing the driver with a suitable compatible wall dimmer.

JCC specifies a 1% to 100% dimming range, allowing users to reduce light levels for softer ambient illumination or increase them for brighter task lighting.

This makes the BC020010 particularly relevant for customers searching for a:

Triac dimmable LED driver, trailing-edge LED strip driver, leading-edge LED driver, dimmable 24V LED power supply or dimmable driver for kitchen LED strip.

Designed for Single-Colour LED Strip

The BC020010 is specifically designed for use with single-colour LED strip lighting.

This includes compatible fixed-colour LED tape such as 3000K warm white or 4000K neutral white LED strip, rather than RGB or RGBW systems that require dedicated multi-channel control equipment.

This makes it a straightforward solution for professional linear lighting projects where only brightness adjustment is required.

Ideal for Kitchen and Under-Cabinet Lighting

The compact size and 25W output make the JCC BC020010 particularly suitable for smaller under-cabinet and kitchen LED strip lighting installations.

A typical setup may include:

24V LED strip + JCC BC020010 driver + compatible wall dimmer

This allows homeowners to adjust under-cabinet lighting from brighter task lighting during food preparation to softer ambient lighting in the evening.

Compact Driver for Concealed Installation

The BC020010 measures approximately 128mm x 53mm x 30mm, making it relatively compact for integration into suitable accessible locations within kitchen, furniture and architectural lighting installations.

Its smaller footprint can be useful when working with cabinets, ceiling voids, cupboards or dedicated driver locations where installation space is limited.

Class II Construction

JCC specifies the BC020010 as a Class II electrical product.

Class II equipment uses double or reinforced insulation as part of its electrical protection design.

IP20 Indoor LED Driver

The JCC BC020010 carries an IP20 rating, meaning it is intended for suitable dry indoor environments.

Typical applications include:

kitchens, bedrooms, living areas, wardrobes, retail displays, shelving, reception areas and indoor commercial lighting.

It should not be considered a weatherproof driver for exposed exterior or wet-location installations.

Operating Temperature Range

The BC020010 has a stated operating temperature range of approximately -20°C to +50°C.

JCC also specifies that the driver must not be covered with insulation and requires free airflow around its installation position.

Correct thermal management is important for LED drivers because excessive heat can reduce reliability and operating life.

5-Year JCC Warranty

The JCC BC020010 carries a 5-year warranty, providing additional reassurance for professional residential and commercial LED strip installations.