Heatrea 95200253 Sadia 5 Litre Supreme 165 Boiling Water Heater (20 Cups at a Time)

The Heatrae Sadia Supreme 165 95200253 is a permanently plumbed, wall-mounted boiling water dispenser for preparing hot drinks in staff kitchens, offices and other shared refreshment areas. Its 5 litre capacity provides a useful supply of ready-heated water, without repeatedly filling and boiling a kettle throughout the working day.

This is the white Supreme 165, with a 2.5kW heating element rated at 240V. Its wall-mounted design keeps the main unit above the work surface, leaving space beneath the dispensing outlet for cups and other suitable containers.

30 Cups Ready to Dispense

The Supreme 165 offers 30 cups of immediate draw-off, based on the manufacturer’s 167ml cup size. Its published one-hour recovery figure is 165 cups, helping buyers compare its ongoing output with other commercial boiling water dispensers.

These figures describe different things: immediate draw-off is the available heated reserve, while hourly recovery describes replenishment over time. Larger mugs will reduce the number of drinks available from that reserve, so choose capacity around your busiest break periods.

Intelliboil Plus Heating Control

Intelliboil Plus manages the boiling cycle and reduces the water temperature by 10°C after an hour without use. This reduces the temperature being maintained during quieter periods, rather than keeping the same setting regardless of demand.

Automatic filling and heating simplify everyday operation once the dispenser has been correctly installed and commissioned. Separate power and temperature-ready indicators make its operating status easy to check.

Built-in Scale Conditioning

An integral electronic water conditioner helps reduce scale deposition. This is particularly relevant in hard water areas, although the dispenser still needs inspection and descaling as required.

The engineering-grade thermoplastic water container, detachable steam-condensing chamber and modular construction support servicing. Biomaster antimicrobial technology helps protect treated surfaces; routine cleaning remains necessary.

Check the Installation Space

The unit measures 510mm high × 335mm wide × 200mm deep and weighs 11.8kg when full. It requires a suitable cold water supply, electrical connection and correctly arranged vent pipe.

Installation should be carried out by a competent person, with access retained for maintenance. The manufacturer recommends positioning it above a draining board or using an appropriate accessory drip tray.

For workplaces choosing a 5 litre commercial water boiler, the Supreme 165 combines a white finish, automatic operation and clearly stated dispensing capacity. It carries a two-year manufacturer’s warranty, subject to registration and the applicable terms.