Heatrae 95200254 Sadia 7.5 Litre Supreme 180 Boiling Water Heater

Heatrae Sadia Supreme 180 White 7.5 Litre Boiling Water Dispenser

The Heatrae Sadia Supreme 180 95200254 is a white, wall-mounted boiling water dispenser for offices, staff kitchens and shared refreshment areas. Its 7.5 litre capacity provides a larger heated reserve for preparing hot drinks during busy breaks, with permanent plumbing removing the need to refill a kettle manually.

This is the white Supreme 180, with a 2.5kW heating element rated at 240V. Automatic filling and heating keep everyday operation straightforward once the unit has been professionally installed and commissioned.

45 Cups of Immediate Draw-Off

The Supreme 180 provides 45 cups of immediate draw-off, based on the manufacturer’s 167ml cup size. Its published one-hour recovery figure is 180 cups.

These figures help you assess different aspects of demand. Immediate draw-off describes the heated reserve available for a busy round of drinks, while hourly recovery describes replenishment over time. Larger mugs mean fewer servings, so consider your busiest periods when choosing a commercial water boiler.

Compared with the white 5 litre Supreme 165, this model offers 50% more storage capacity and immediate draw-off. It retains the same height and width but requires an additional 62mm of depth.

Intelliboil Plus Temperature Management

Intelliboil Plus manages the boiling cycle and reduces the water temperature by 10°C after an hour without use. This lowers the temperature maintained during quieter periods.

Separate power and temperature-ready indicators make the dispenser’s status easy to check. The wall-mounted arrangement also keeps the main appliance above the work surface, leaving room beneath the outlet for suitable cups and containers.

Scale Conditioning and Service Access

An integral electronic water conditioner helps reduce scale deposition. It does not eliminate limescale, so inspection and descaling remain part of maintaining the unit, particularly in hard water areas.

The Supreme features an engineering-grade thermoplastic water container, modular construction and a detachable steam-condensing chamber to support servicing. Biomaster antimicrobial technology helps protect treated surfaces, alongside normal cleaning.

Plan the Installation

The dispenser measures 510mm high × 335mm wide × 262mm deep and weighs 15.4kg when full. It requires a suitable cold water supply, electrical connection and correctly installed vent pipe.

A competent installer should confirm the mounting position, wall strength and maintenance access. This model carries a two-year manufacturer’s warranty, subject to registration and the applicable terms.