What is the Aurora ChromaFlex RGB LED strip light AU-ST224RGB used for?
The Aurora ChromaFlex RGB LED strip light AU-ST224RGB is designed for colour-changing decorative and architectural lighting. It can be installed in kitchen cabinets, ceiling coves, shelving, media rooms, gaming rooms, bars, restaurants, retail displays and other residential or commercial feature-lighting applications.
What voltage and wattage does the Aurora ChromaFlex RGB LED strip AU-ST224RGB use?
The Aurora ChromaFlex RGB LED strip AU-ST224RGB operates from a 24V DC constant-voltage supply and consumes 14.4W per metre. The connected wattage should be calculated by multiplying 14.4W by the installed strip length, with suitable additional driver capacity allowed in accordance with the driver manufacturer’s instructions.
Does the Aurora ChromaFlex RGB LED strip AU-ST224RGB need a separate driver and controller?
Yes. The Aurora ChromaFlex RGB LED strip AU-ST224RGB requires a suitably rated 24V constant-voltage LED driver and a compatible RGB controller. These components control the power supply and colour selection and are normally purchased separately. Always confirm that both components can support the total connected load.
Can an electrician cut the Aurora ChromaFlex RGB LED strip AU-ST224RGB to size?
Yes. The Aurora ChromaFlex RGB LED strip AU-ST224RGB has designated cutting points every 100mm. It must only be cut at these marked positions. Cutting elsewhere may damage the electrical circuit or prevent part of the strip from operating correctly.
What is the maximum run length for the Aurora ChromaFlex RGB LED strip AU-ST224RGB?
The Aurora ChromaFlex RGB LED strip AU-ST224RGB supports a maximum run of 10 metres with a single-end feed or 20 metres with a correctly arranged double-ended feed. The 50m reel should therefore be divided into appropriately powered sections rather than connected as one continuous run.
