Astro Lighting 1331002 Elis Twin LED Textured Black Exterior Wall Light

Astro Elis Twin LED 1331002 Textured Black Exterior Wall Light

Create a strong architectural lighting effect around contemporary homes, hotels and commercial buildings with the Astro Elis Twin LED 1331002. Finished in Textured Black, this compact exterior wall light combines a modern square profile with an integrated warm-white LED, making it suitable for entrances, patios, terraces, exterior corridors and garden-facing walls.

The Elis Twin LED uses a concealed twin-light design to produce decorative illumination across the wall. Its shallow projection and understated black finish allow the fitting to complement modern brickwork, render, timber cladding, stone and other architectural surfaces without appearing bulky.

Astro specifies an integrated 8.2W LED, approximately 524 lumens, a 3000K colour temperature and a 35° beam angle.

Textured Black Architectural Wall Light

Product code 1331002 is supplied in a Textured Black finish.

The dark, lightly textured surface works naturally with:

• Modern black window frames
• Anthracite doors and garage doors
• Contemporary rendered façades
• Red and dark brickwork
• Timber exterior cladding
• Stone entrance walls
• Black rainwater goods
• Modern garden structures
• Hotel and apartment entrances
• Commercial exterior architecture

The square appearance gives the Elis Twin a more architectural character than a traditional lantern-style outdoor fitting. It can blend into a dark building exterior or provide a defined visual contrast against white render and pale stone.

Integrated 8.2W LED Light Source

The Astro Elis Twin contains an integrated 8.2W high-powered LED, so a separate bulb or replaceable lamp is not required.

The LED and associated control equipment are incorporated into the wall fitting, creating a clean exterior design without visible lamps. Astro lists a total output of approximately 524 lumens and an efficacy of approximately 64 lumens per watt.

The integrated light source can reduce routine lamp replacement compared with an exterior wall fitting that uses conventional replaceable bulbs.

Warm-White 3000K Exterior Lighting

Product code 1331002 produces 3000K warm-white light.

This colour temperature provides a clean, comfortable appearance that suits modern residential and hospitality exteriors. It is warm enough to create an inviting entrance while remaining crisp enough to highlight architectural surfaces and circulation routes.

Warm-white 3000K lighting works particularly well with:

• Brick and stone walls
• Timber cladding
• Contemporary render
• Black and anthracite finishes
• Residential patios
• Hotel terraces
• Apartment entrances
• Exterior corridors
• Covered walkways

The Elis Twin also has a CRI 80 colour-rendering rating and three-step MacAdam colour consistency.

Twin-Direction Architectural Lighting Effect

The Elis Twin’s two-light configuration is intended to create a decorative twin-direction wall-lighting effect.

When mounted correctly, the fitting can produce defined illumination above and below its compact square body. This can add depth to a plain exterior wall, emphasise surface texture and create repeating patterns when several fittings are installed along the same elevation.

The technical specification gives a 35° beam angle, helping create a controlled architectural spread rather than an unrestricted general glow.

Possible uses include:

• Highlighting entrance walls
• Creating decorative lighting on rendered façades
• Illuminating exterior corridors
• Adding visual rhythm along apartment buildings
• Enhancing hotel terraces
• Marking patio and garden seating areas
• Lighting columns and structural features
• Creating repeated wall patterns

Approximately 524-Lumen Output

The integrated LED produces approximately 524 lumens.

This output makes the Elis Twin suitable for architectural, decorative and supplementary exterior illumination. It can provide useful light around entrances and circulation areas, but the final coverage will depend on mounting height, wall colour, surface texture and surrounding lighting.

The fitting should be considered as part of the wider exterior lighting design. Larger spaces may also require bollards, floodlights, recessed lights or additional wall fittings.

IP54 Exterior Protection

The Astro Elis Twin has an IP54 rating.

This means the enclosure is protected against limited dust ingress and against water splashes from different directions. It is designed for exterior wall mounting but is not intended for permanent immersion or exposure to high-pressure water jets.

The IP54 rating makes the Elis Twin suitable for typical outdoor wall applications when it is correctly installed and maintained.

Appropriate applications may include:

• Exterior house walls
• Covered and open entrances
• Patios and terraces
• Garden-facing walls
• Apartment walkways
• Hotel outdoor areas
• Commercial façades
• Porch areas
• Residential courtyards

Suitable for Bathroom Zones 2 and 3

Although primarily classified as an exterior wall light, Astro also lists the Elis Twin as suitable for bathroom zones 2 and 3.

This may allow the fitting to be used as an architectural wall light in suitably positioned bathrooms, spa-style interiors and other moisture-prone spaces. The final position must comply with applicable wiring regulations and Astro’s installation instructions.

The product is not listed for bathroom zone 1.

Compact 141mm Square Design

The Elis Twin has a compact geometric form measuring approximately:

• Height: 141mm
• Width: 141mm
• Projection from wall: 51mm
• Gross weight: approximately 0.9kg

Its shallow 51mm projection helps the fitting remain close to the wall. This can be beneficial beside entrances, along narrower walkways and in exterior areas where a deeper wall lantern could feel intrusive.

Surface-Mounted Exterior Wall Light

The Astro Elis Twin is designed for surface-mounted wall installation.

It does not require a recessed wall cavity or a large cut-out. The mounting plate attaches to a suitable wall surface while the electrical connection is concealed behind the fitting.

Astro specifies wall mounting as the approved installation orientation. The wall construction and chosen fixings must be capable of supporting the fitting securely.

Clear-Glass Diffusers

The shared technical datasheet lists clear glass as the diffuser material and finish.

The clear-glass components protect the integral light source while allowing the controlled LED beams to leave the fitting efficiently. The diffusers form part of the complete product and do not require separate shades.

Non-Dimmable Integrated LED

Astro specifies the Elis Twin LED as non-dimmable.

The fitting is designed for standard on-and-off operation and should not be connected to a dimmer unless Astro provides separate written compatibility information.

Light output should therefore be controlled through switching, timers, sensors or building-management controls rather than conventional phase dimming.

Unswitched Exterior Wall Light

The Elis Twin does not include an integral switch.

It must be operated through an external control such as:

• Indoor wall switch
• Exterior-rated switch
• Photocell
• Timer
• PIR or presence sensor
• Smart relay
• Building lighting-control system

Any external control must be electrically compatible with the integrated LED driver and installed in accordance with applicable regulations.

Integral Driver – No Separate Control Gear Required

Astro states that a separate external LED driver is not required.

The driver is incorporated into the fitting and accepts a listed input range of approximately 100–240V at 50/60Hz. This allows the Elis Twin to be wired directly into a suitable mains lighting circuit without separately selected constant-current control gear.

The integrated driver has an approximate rated lifetime of 25,000 hours according to the technical datasheet.