{"product_id":"jcc-bc020009-24v-12w-non-dimmable-ip20-driver","title":"JCC BC020009 24V 12W Non-dimmable IP20 driver","description":"\u003ch2\u003e\u003cspan\u003eJCC BC020009 12W 24V Non-Dimmable IP20 LED Strip Driver\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003ePower shorter runs of single-colour or RGBW LED tape with the compact \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eJCC BC020009 12W 24V constant-voltage LED driver\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Designed for small indoor lighting installations, it converts a 220–240V AC mains supply into a stable 24V DC output for compatible low-voltage LED strip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIts compact \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e98mm x 39mm x 22mm\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e enclosure makes BC020009 particularly useful for cabinet lighting, shelving, display furniture, kitchen plinths, short sections of coving and other applications where only a modest amount of LED tape is required.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eSuitable for single-colour and RGBW LED strip\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe BC020009 can power compatible 24V single-colour LED tape directly or provide the 24V supply required by a separate RGBW controller.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWhen used with RGBW tape, the driver supplies fixed-voltage power to the controller, while the controller manages the individual red, green, blue and white channels. The combined connected load must remain within the driver’s 12W maximum.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eMaximum LED strip run lengths\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe permitted tape length depends on its wattage per metre. JCC specifies the following maximums:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e4.8W\/m LED strip: up to 2.5 metres\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e9.6W\/m LED strip: approximately 1.3 metres\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e14.4W\/m LED strip: approximately 0.8 metres based on the 12W driver capacity\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe load can be checked using:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eTape wattage per metre × installed length = total connected load\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe calculated total must not exceed 12W. Strip cutting intervals, cable length and voltage drop must also be considered when determining the final usable length.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFixed-output, non-dimmable driver\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe JCC BC020009 is a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enon-dimmable driver\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. It must not be connected to a leading-edge, trailing-edge or other mains dimmer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFor a single-colour installation requiring brightness control, a compatible dimmable driver should be selected instead. RGBW systems may use compatible low-voltage control equipment after the driver, provided the driver continues to receive a standard switched mains supply.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCompact indoor installation\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe white IP20 enclosure is designed for dry indoor locations. It must not be installed outdoors or exposed to water, condensation or excessive moisture.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAdequate airflow must be maintained around the driver. It must not be covered with thermal insulation or enclosed in a location where heat cannot escape. The driver should also remain accessible for inspection, testing and replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eKey features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCompact 12W LED strip driver\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRegulated 24V DC constant-voltage output\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e220–240V AC, 50\/60Hz input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable for single-colour LED tape\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSuitable as the power supply for compatible RGBW systems\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNon-dimmable mains input\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eClass II double-insulated construction\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNo earth connection required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e0–12W nominal power range\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e82% rated efficiency at full load\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e0.5W no-load power\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIP20-rated white enclosure\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDimensions: 98mm x 39mm x 22mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOperating temperature range of -20°C to +50°C\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRequires adequate ventilation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMust not be covered with insulation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFive-year JCC manufacturer’s warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThe LED strip, RGBW controller, connectors, cables and aluminium profiles are not included. Installation should be completed by a qualified electrician in accordance with current UK wiring regulations.\u003c\/span\u003e\u003c\/p\u003e","brand":"JCC","offers":[{"title":"Default Title","offer_id":57491447677303,"sku":"BC020009","price":6.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0687\/8927\/2802\/files\/jcc-bc020009-12w-24v-non-dimmable-led-strip-driver.webp?v=1790322135","url":"https:\/\/www.electricalsonline.co.uk\/products\/jcc-bc020009-24v-12w-non-dimmable-ip20-driver","provider":"Electricals Online","version":"1.0","type":"link"}